![]() ![]() The router specifies whether the print server obtains its address, configuration information, or both from a DHCPv6 server. RTR_AV: (default) Stateful auto-configuration method is determined by a router. POLICY=RTR_AV/RTR_UN/ALWAYS: Set one of the following IPv6 addressing policies: Idle Timeout period (default is 270 seconds, 0 disables the timeout)ĬFG DNS 1: IPv4 address of a primary DNS server (one byte at a time).ĬFG DNS 2: IPv4 address of a secondary DNS server (one byte at a time). If you specify BOOTP=NO*, DHCP=NO* and AUTO IP=NO*, you can manually set the following TCP/IPv4 parameters from the control panel: RENEW: Select whether to renew ( YES or NO) the lease.ĪUTO IP=YES* Automatically assign a link-local IPv4 address in the form .x. RELEASE: Select whether to release ( YES) or save ( NO) the current lease. If DHCP=YES* and the print server has a DHCP lease, you can configure the following DHCP settings: ![]() Use this menu to establish network configuration settings.Īccess the TCP/IP menu and set TCP/IP protocol parameters.īOOTP=YES* Enable IPv4 configuration by a BOOTP Server.ĭHCP=YES* Enable IPv4 configuration by a DHCP Server. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |